Installation Guide
Please only use the provided screws for the entire installation process.
For 1U Series
Step 1. Mounting Bracket Installation
Use the Mounting Bracket Screws (16) provided to attach the
Mounting Brackets (2) to the ATS PDU.
Step 2. ATS PDU Mounting
Use the Washers (4) and Screws (4) provided to secure the ATS PDU
to your existing rack system.
Step 3: Cord Retention Tray Installation (optional)
Attach the Cord Retention Tray to the ATS PDU with the 4
Cord Retention Tray Mounting that are provided.
Use the Cable Ties provided to fasten each power cord to the
Cord Retention Tray.
©2014. CyberPower Systems, Inc. All rights reserved.
7