Installation - CyberPower CP CP-H720P CP-H720P Quick Start Manual

Usb 2.0 7-port hub
Hide thumbs Also See for CyberPower CP CP-H720P CP-H720P:
Table of Contents

Advertisement

This USB Hub is a plug and play device. Your computer will display the Add New
Hardware Wizard after connecting the hub to your computer. Installation may be
done whether your computer is powered on or off. It is not necessary to restart
your computer after installation.
1) Connect the USB A-mini B cable (included in this package) to the Upstream
port on the USB Hub, then connect the other end of the cable to an unused
USB port on your computer.
2) Connect your USB devices to the Downstream ports on the USB Hub.
Self-Powering the Hub:
If additional power is required for connected USB devices, plug the DC power
adapter into the power jack, then plug the power adapter into a wall outlet.
NOTE:
Please use this USB 7-Port Hub under Self-Power Mode.

Installation

6

Advertisement

Table of Contents
loading

Table of Contents