Firmware Upgrade
8. The download progress window will open after you click the Send button
9. After uploading the binary file Hyperterminal will show as below
LCD
Update the following file to upgrade the firmware
- cpsatslafw_xxx.bin
Note that the XXX is not part of the file name but is where the version number in
the filename is given.
Use the following steps to upgrade the firmware.
1. Download the latest firmware from cpsww.com
2. Extract the file to "C:\"
3. Open Hyper Terminal to connect the ATS PDU and use the command "@NEW"
4. The ATS PDU will reboot and show main menu on Hyperterminal
5. Press "2" to select LCD upgrade
17
©2014. CyberPower Systems, Inc. All rights reserved.