Adjusting The Starter Cable - Yamaha YFM450FAR Service Manual

ADJUSTING THE SPEED LIMITER/

ADJUSTING THE STARTER CABLE

Not For Resale
www.SmallEngineDiscount.com
2.Adjust:
Speed limiter length
G
*****************************************************
Speed limiter length adjustment steps:
Loosen the locknut 1.
G
Turn the adjuster 2 in or out until the
G
specified speed limiter length is obtained.
Speed limiter length is
Turning in
decreased.
Speed limiter length is
Turning out
increased.
G
Tighten the locknut.
WARNING
Particularly for a beginner rider, the
G
speed limiter should be screwed in
completely. Screw it out little by little as
their riding technique improves. Never
remove the speed limiter for a beginning
rider.
For proper throttle lever operation do not
G
turn out the adjuster more than 12 mm
(0.47 in). Also, always adjust the throttle
lever free play to 3 ~ 5 mm (0.12 ~ 0.20 in).
*****************************************************
ADJUSTING THE STARTER CABLE
1.Remove:
Seat
G
Fuel tank side panel (left)
G
Refer to "SEAT, CARRIERS, FENDERS
AND FUEL TANK".
3 - 17
CHK
ADJ