Adjusting The Select Lever Control Cable And Shift Rod - Yamaha YFM450FAR Service Manual

ADJUSTING THE SELECT LEVER CONTROL CABLE AND SHIFT ROD

www.SmallEngineDiscount.com
BLEEDING THE HYDRAULIC BRAKE SYSTEM/
Not For Resale
3 - 42
k.Add brake fluid to the proper level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL".
WARNING
Check the operation of the brake after
bleeding the brake system.
*****************************************************
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
1 NEUTRAL
2 HIGH
3 LOW
4 REVERSE
5 PARK
6 Control cable
7 Select lever shift rod
WARNING
Before moving the select lever, bring the
machine to a complete stop and return the
throttle lever to its
Otherwise the transmission
damaged.
1.Adjust:
Rear brake pedal free play
G
Refer to "ADJUSTING THE REAR BRAKE".
2.Adjust:
Select lever control cable
G
Select lever shift rod
G
*****************************************************
Adjustment steps:
Control cable:
G
Make sure the select lever is in NEUTRAL.
G
Adjust the control cable so there is zero free
play in the cable. When the adjustment is
correct, slack in the return spring 1 will be
taken up.
NOTE:
In some cases it will be necessary to further
adjust the cable with
arrangement that holds the cable to its mount.
CHK
ADJ
closed position.
may be
2
the locknuts