Table of Contents
Advertisement
REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT
www.SmallEngineDiscount.com
ASSEMBLING THE FINAL DRIVE GEAR
1.Install:
Drive pinion gear (with shim(s) and bearing)
G
(proper shim size as calculated)
Bearing retainer (drive pinion gear) 1
G
Use a bearing retainer wrench 2.
CAUTION:
Always use a new bearing.
G
The final drive shaft bearing retainer has
G
left-hand
counterclockwise to tighten it.
2.Adjust:
Final gear lash
G
Refer
ADJUSTING THE FINAL GEAR LASH".
INSTALLING THE FINAL DRIVE GEAR
1.Lubricate:
Drive shaft
G
Coupling gear
G
O-ring
G
Oil seal
G
Bearing
G
2.Install:
Drive shaft 1
G
(to the universal joint)
Not For Resale
7 - 30
DRIV
100 Nm (10.0 m • kg, 72 ft • lb)
threads.
Turn
the
Bearing retainer wrench:
P/N. YM-04050, 90890-04050
to
"MEASUREMENT
Lithium-soap-based grease
retainer
AND
Advertisement
Table of Contents
Troubleshooting
