Checking The Coolant Level - Yamaha YFM450FAR Service Manual

CHECKING THE COOLANT LEVEL

Not For Resale
www.SmallEngineDiscount.com
CHECKING THE COOLANT LEVEL
1.Place the machine on a level surface.
2.Remove:
Seat
G
Fuel tank side panel (left)
G
3.Check:
Coolant level
G
The coolant level should be between the
minimum level mark a and maximum level
mark b.
Below the minimum level mark → Add the
recommended coolant to the proper level.
CAUTION:
Adding water instead of coolant lowers
G
the antifreeze content of the coolant. If
water is used instead of coolant, check
and if necessary, correct the antifreeze
concentration of the coolant.
Use only distilled water. However, soft
G
water may be used if distilled water is not
available.
4.Start the engine, warm it up for several
minutes, and then turn it off.
5.Check:
Coolant level
G
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
6.Install:
Fuel tank side panel (left)
G
Seat
G
Refer to "SEAT, CARRIERS, FENDERS
AND FUEL TANK".
3 - 29
CHK
ADJ