Yamaha YFM450FAR Service Manual page 92

CHANGING THE ENGINE OIL
Not For Resale
www.SmallEngineDiscount.com
Lubricate the O-ring 3 of the new oil filter
G
cartridge with a thin coat of engine oil.
CAUTION:
Make sure that the O-ring 3 is positioned
correctly in the groove of the oil filter
cartridge.
G
Tighten the new oil filter cartridge to
specification with an oil filter wrench.
Oil filter cartridge:
17 Nm (1.7 m • kg, 12 ft • lb)
*****************************************************
8.Install:
Oil strainer
G
Compression spring
G
Oil strainer cover 1
G
Engine oil drain bolt 2
G
9.Fill:
Crankcase
G
Refer to "CHECKING THE ENGINE OIL
LEVEL".
Oil quantity:
Periodic oil change:
2.3 L (2.0 Imp qt, 2.4 US qt)
With oil filter replacement:
2.4 L (2.1 Imp qt, 2.5 US qt)
Total amount:
2.6 L (2.3 Imp qt, 2.7 US qt)
10.Install:
Engine oil filler plug
G
11.Warm up the engine for a few minutes, then
stop the engine.
12.Check:
Engine
G
(for engine oil leaks)
Oil level
G
Refer to "CHECKING THE ENGINE OIL
G
LEVEL".
3 - 25
CHK
ADJ
32 Nm (3.2 m • kg, 23 ft • lb)
23 Nm (2.3 m • kg, 17 ft • lb)