Page 4
Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost. Visit www.ricelake.com/webinars.
Introduction The Versa-portion RLP-S/SM is a multi-purpose bench scale that offers practical solutions for a full range of applications. Its internal resolution of 1/90,000 gives you maximum precision and accuracy. Its backlit LCD display enables operators to easily see weights. When portability is required, choose the optional rechargeable battery for over 60 hours of continuous usage.
4. Press the key to save the setting and TARE The Versa-portion RLP-S/SM has a built-in automatic return to weigh mode. shut-off timer. This timer can be set to turn the unit off after three minutes of inactivity or 10 minutes of Default Primary Unit inactivity.
After three seconds, the unit will return to weigh mode. Performing a Calibration The Versa-portion RLP-S/SM must be calibrated in grams or kilograms, and SPEC 01 and 02 must be set for the gram value (or kg in the SM version). See Section 3.4.
SPEC Number Bit 2 Bit 1 Bit 0 Resolution Selection Weight single interval or multi-interval 00 - 1/2000 0 - Single interval 01 - 1/3000 10 - 1/6000 11 - 1/7500 Decimal point figure for numeral Negative weight display mask IR (inter resolution) mode protected by 0 - Period 0 - Minus gross >...
Battery Pack Replacement/Installation An optional DC battery pack (PN 108516) for the Versa-portion RLP-S/SM is available and can be purchased from RLWS to ship with the scale or retrofit in the field. The rechargeable 6V 5.0 AH battery pack allows for up to 60 hours of scale use without an AC power supply (with display set to Dimmer Level 2).
Specifications Display Capacity/Minimum Graduation/Tare Range LED, 6 digits Capacity Capacity Min Capacity Min Graduation Tare Range RLP-6S 6.000 lb x 0.002 lb; 3000 g x 1 g; 60.00 oz x 0.02 oz 3 kg 20 g 1 g (1e = 30IR) 0 - 1.499 kg RLP-15S 15.000 lb x 0.005 lb;...
Page 12
Versa-portion RLP-S/SM Limited Warranty Rice Lake Weighing Systems (RLWS) warrants that all RLWS equipment and systems properly installed by a Distributor or Original Equipment Manufacturer (OEM) will operate per written specifications as confirmed by the Distributor/OEM and accepted by RLWS. All systems and components are warranted against defects in materials and workmanship for one year.