Clutch Center Lock Nut Removal - Honda Nighthawk CB 750 1991 Service Manual

ClutchIGearshift Linkage
Clutch Center Lock Nut Removal
Unstake the nut
Set the clutch center holder to the pressure plate bosses and
loosely install the nuts.
rn
Clutch center holder 07JMB-MN50300 or
07HGB401000A 1U.S.A.onlyl
Temporarily remove the tool and tighten nuts;then reinstall
the clutch center holder onto the bosses. Use at least four
clutch lifter plate bolts t o secure the tool t o the clutch.
Hold the clutch center holder and remove the lock nut as
shown.
rn
Lock nut wrench, 26 x 30 mm 077160020203
Extension bar 077160020500 or
equivalent commercially
available
in U.S.A.
-
I
1 1 ) CLUTCH
.
.
PLATE BOLTS