Front Wheel Removal/Installation - Honda Nighthawk CB 750 1991 Service Manual

Front Wheel/Suspension/Steering
Front Wheel Removal/lnstallation
Brake dust may contain asbestos fibers.
Never use an air hose or dry brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner or alternate method
approved by OSHA, designed to minimize the hazard caused by airborne asbestos fibers.
asbestos fiber have been found t o cause respiratory disease and cancer.
Keep grease off of brake disc and pads
CAUTION
-
A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated
disc w i t h a high quality brake degreasing agent. -
Do not use the oil filter as a jack point.
NOTE
.
Do not squeeze the brake lever when the caliper is removed, or it will be defficult t o refit the disc between the brake
I
oads.
I
I
Procedure
1
W t y
I
Remarks
I
Removal Order
Speedometer cable
Axle bolt
Axle pinch bolt
Front axle
Front wheel assembly
Side collar
Speedometer gear box assembly
1
1
4
1
1
1
1
Installation is in the reverse order of removal.
At installation, apply a thin coating of grease to the front
axle. Insert the axle through the fork leg. Align the groove in
the axle with the outer surface of the fork leg.
At installation, align the projection of the speedometer gear
box with the projection on the fork leg.