Honda Nighthawk CB 750 1991 Service Manual page 133

Rear Wheel/Susoension
Brake dust may contain asbestos fibers.
Never use an air hose or drv brush to clean brake assemblies. Use an OSHA-amroved vacuum cleaner or alternate method
. .
approved by OSHA, designed to minimize the hazard caused by airborne asbestos fibers.
I
.
Inhaled asbestos fiber have been found to cause respiratory disease and cancer.
1
Keep grease off of brake drum and shoes
a
CAUTION
I
A contaminated brake drum or shoe reduces stopping power. Discard contaminated shoes and clean a
NOTE
-
For rear wheel removal, a hoist or other support is required to support the motorcycle.
Adjust the drive chain free play after installing the wheel.
-
1
Procedure
contaminated disc w i t h a high quality brake degreasing agent.
Removal Order
(1) Brake adjusting nut
(2) Brake rod
(3) Spring
(4) Brake rod joint piece
(5) Drive chain adjusting nut
( 6 ) Cotter pin
(7) Nut
(8) Washer
(9) Rubber cushion
(10) Brake stopper arm pivot bolt
(1 1
)
Brake stopper arm
(12) Rear axle nut
(1 3) Drive chain adjuster
(14) Drive chain
(1 5) Rear axle
(1 6) Rear wheel assembly
(1 7) Right side collar
(1 8) Left side collar
(19) Brake panel assembly
Remarks
Installation is in the reverse order of removal.
Loosen the adjusting nut fully.
Move the rear wheel forward and derail the drive chain from
the driven sprocket.
Disassembly (page 12-7).