Rear Brake Panel Disassembly/Assembly - Honda Nighthawk CB 750 1991 Service Manual

Brake System
Rear Brake Panel Disassembly/Assembly
Brake dust may contain asbestos fibers.
Never use an air hose or dry brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner or alternate method
approved by OSHA, designed to minimize the hazard caused by airborne asbestos fibers.
I
.
Inhaled asbestos fiber have been found to cause respiratow disease and cancer.
I
Keep grease off of brake drum and shoes.
CAUTION
/
.
A contaminated brake drum or shoe reduces stopping power. Discard contaminated shoes and clean a
contaminated disc w i t h a hiah aualitv brake deareasina aaent.
Requisite Service
-
Rear wheel removal/installation (page 1 1-2)
Procedure
I
Q'tv
/
Remarks
Disassembly Order
(1 )
Brake arm pinch bolt
(2) Brake arm
(3) Brake indicator
l(10) Brake panel
(4)
(51
(61
(71
(81
(9)
Assembly is in the reverse order of disassembly.
At installation, align the punch marks on the brake cam and
Felt seat
Cotter pin
Cotter pin plate
Brake shoe
Shoe spring
Brake cam
pin.
At installation, align the wide tooth with the wide slot in the
brake cam.
Install with endless side facing out
At installation, apply grease to the sliding surface and cam
portion.