EMU01155
Throttle Friction Adjusting Screw
A friction device in the remote control box
provides adjustable resistance to movement
of the remote control lever, and can be set
according
adjusting screw is located on the front of the
remote control box.
701035
Resistance
Increase
Decrease
w
Do not overtighten the friction adjusting
screw. If there is too much resistance, it
may be difficult to move the lever, which
could result in an accident.
702035
EMU00109
STEERING FRICTION ADJUSTING
SCREW (for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator
screw/bolt is located at right(starboard) side
of the through tube end on the clamp brack-
et.
000550
to
operator
preference.
Screw
Turn clockwise
Turn counterclockwise
preference.
An
E
An
adjusting
2-16