Transporting And Storing Outboard Motor; Trailering Outboard Motor; Storing Outboard Motor - Yamaha E115A Owner's Manual

Yamaha outboard motor
Hide thumbs Also See for E115A:
Table of Contents

Advertisement

4-7
EMU01369
TRANSPORTING AND

STORING OUTBOARD MOTOR

w
Leaking fuel is a fire hazard. When trans-
porting and storing the outboard motor,
close the air vent screw and fuel cock to
prevent fuel from leaking.
001329
EMU00326

TRAILERING OUTBOARD MOTOR

The motor should be trailered and stored in
the normal running position. If there is insuf-
ficient road clearance in this position, then
trailer the motor in the tilt position using a
motor support device such as a transom
saver bar.
For further details, consult your Yamaha
dealer.
w
8 Never get under the lower unit while it
is tilted, even if a motor support bar is
used. Severe injury could occur if the
outboard accidentally falls.
8 USE CARE when transporting fuel
tank, whether in a boat or car.
8 DO NOT fill fuel container to maximum
capacity. Gasoline will expand consid-
erably as it warms up and can build up
pressure in the fuel container. This
can cause fuel leakage and a potential
fire hazard.
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

115b150aL150a175a140b200a ... Show all

Table of Contents