Yamaha E115A Owner's Manual page 89

115B, 140B
w
e
q
E115A, 150A,
L150A, 175A
e
q
EMU00978
115B, 140B
1) Remove the nut holding the fuel filter
assembly if equipped.
2) Unscrew the filter cup 1, catching any
spilled fuel in a rag.
3) Remove the filter element 2, and wash
it in solvent.
Allow it to dry. Inspect the filter element
001333
and O-ring 3 to make sure they are in
good condition. Replace them if neces-
sary.
4) Reinstall the filter element in the cup.
Make sure the O-ring in position in the
cup. Firmly screw the cup onto the filter
r
housing 4.
5) Attach the filter assembly to the bracket
with that the fuel hoses are attached to
the filter assembly.
000983
6) Run the engine and check the filter and
lines for leaks.
EMU01307
E115A, 150A, L150A, 175A
NOTE:
If any water is in the fuel, the red float in the
fuel filter unit will rise. If so, remove the cup
and drain the water.
1) Remove the filter cup 1, catching any
spilled fuel in a container.
001334
2) Remove the filter element 2, wash it in
solvent, and allow it to dry. Inspect the
filter element, O-ring 3, and float 5 to
r
make sure they are in good condition,
and replace if necessary.
w
3) Re-install the filter element in the filter
housing 4 and properly re-insert the
float into the filter cup.
t
4) Re-insert the O-ring in its proper posi-
tion and re-install the filter cup onto the
001335
filter housing firmly.
5) Run the engine and check the filter and
lines for leaks.
E
4-18