Cleaning Fuel Tank - Yamaha E115A Owner's Manual

5) With the outboard motor in a vertical
position, and using a flexible or pres-
surized filling device, inject the gear oil
into the oil drain plug hole.
Gear oil grade/capacity:
Refer to "SPECIFICATIONS," page 4-1.
6) When the oil begins to flow out of the
oil level plug hole, insert and tighten the
601033
oil level plug.
7) Insert and tighten the oil drain plug.
EMU01510

CLEANING FUEL TANK

w
Gasoline (petrol) is highly flammable,
and its vapors are flammable and explo-
sive.
8 If you have any question about proper-
ly doing this procedure, consult your
Yamaha dealer.
8 Keep away from sparks, cigarettes,
flames or other sources of ignition
when cleaning the fuel tank.
8 Remove the fuel tank from the boat
before cleaning it. Work only outdoors
in an area with good ventilation.
8 Wipe up any spilled fuel immediately.
8 Reassemble the fuel tank carefully.
Improper assembly can result in a fuel
leak, which could result in a fire or
explosion hazard.
8 Dispose
according to local regulations.
1) Empty the fuel tank into an approved
container.
2) Pour a small amount of suitable solvent
in the tank. Reinstall the cap and shake
000638
the tank. Drain the solvent completely.
of old gasoline
E
(petrol)
4-26