Tilt Lock Mechanism - Yamaha E115A Owner's Manual

E
EMU01610
DIGITAL HOUR METER
200A, L200A
Located on the engine inside the top cowl-
ing, this device measures the total number
of hours the engine has been run since
manufacture. When the main switch is
turned on, initially all segments of the dis-
play will light. The indicator will then display
000130
the number of hours normally.
NOTE:
The number of hours is only measured
when the engine is running. When the main
switch is turned on but the engine is not
running, the digital hour meter will display
the hours run but will not add any further
time to the total.
EMU00153
TILT LOCK MECHANISM (for Manual
tilt model)
The tilt-lock mechanism is used to prevent
reverse thrust from the propeller lifting the
outboard motor when reversing.
To lock it, set the tilt-lock lever in the Lock
q
position.
To release it, place the tilt-lock lever in the
001286
Tilt position.
1 Tilt-lock lever
2-19