3.3 Installation
① The pictures show rear view of the
disassembled monitor and MMI 3G unit.
You can see that original monitor LCD
cable is connected to the MMI 3G unit.
www.car-solutions.com
Rear view of monitor
Rear view of MMI 3G unit
② Disconnect original LCD cable from MMI 3G unit and connect it
to "TO MONITOR" socket of the sub-board.
Then connect the LCD cable included in video interface package
to "TO SYS" socket of the sub-board. Then connect the opposite
end of the cable to MMI 3G unit socket to which original LCD
cable was initially connected.
21