Account Number In Page; Streamlining The Page; Opening And Closing Reports; Latchkey Paging - GE Security Pro 500 User Instructions

Opening and
Closing Reports
Latchkey
Paging
Security Pro 500

Account Number in Page

This part of the page let's you know where the event is occurring.
Code
XXXX
4-digits of account number
Some pager providers transmit only numbers and not alpha-characters. If your account number
contains alpha-characters, check with your provider to see exactly how your account number will
appear on your pager.

Streamlining the Page

If you feel that it is not necessary to see your account number with each page from your system,
you may elect to have the Streamlining feature turned on. Your page will contain only an event
code (Table 1) and a sensor or user number (Table 2).
Ask your dealer or installer if you would like the Streamline feature turned on.
E v e n t c o d e
S e n s o r n u m b e r o r u s e r n u m b e r
Figure 1. Sample Pager Message with Streamline Feature Turned On
The Opening and Closing Reports feature allows up to three users (with pagers) and the central
station to be notified whenever the system is armed or disarmed. Refer to the Appendix A User
Sheets to see which pagers have been set up to receive a page for this feature.
The Opening and Closing Reports feature can be enabled only by the installer.
If the feature is on, users with pagers will receive:
• an Opening Report page every time the system is disarmed:
111 for Level 1—OFF, and the user code entered.
• a Closing Report page every time a user arms the system:
222 for Level 2 or 333 for Level 3, and the user code entered.
See "Notification by Pager" for more information on paging reports.
The Latchkey paging feature allows up to three users (with pagers) to be notified when the sys-
tem is disarmed. Latchkey pages do not report to the central station. This feature is useful when
you're at work and would like to be notified when your daughter or son arrives home and disarms
the system.
The Latchkey paging feature can be enabled only by the installer.
Refer to the Appendix A User Sheets to see which pagers have been set up to receive a Latchkey
page.
Only Latchkey-designated user codes can cause a Latchkey page to be sent. By default, this
includes the first 5 Regular User codes. If you'd like more user codes to be included, contact your
installer.
¾
Preparing the system to send a Latchkey page:
• Arm the system, then press
PAGER ON."
¾
To send a Latchkey page:
• Latchkey-designated user disarms the system.
Users with pagers will receive a message containing 111 and the user code entered to disarm
the system.
Indicates
6
. Touchpads display briefly: "Pager on," or "LATCHKEY
16