Light Control; House Code; Unit Number; Programming Options - GE Simon Security System User Manual

Programming
Options
16
1. Open the cover of the panel.
2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code using the numbered keys.
3. The panel voice prompts you to Please select from START MENU. Press the
Delete button on the START MENU.
4. The panel voice prompts you to Select from MAIN MENU. Press the Access Code
button on the MAIN MENU.
5. The panel voice responds with Access Code 1, press again for next access code,
DONE to select or press CANCEL to quit. Press the access code button again to
hear the next access code. When you hear the access code you wish to delete, press
the DONE Button. The panel voice responds with Access Code X deleted.
6. Close the panel cover.

Light Control

You system has the ability to control lights from the panel. A specific light or group of
lights can be programmed to turn on and off at designated times.

House Code

Refers to a group of lights that can be controlled from the panel.
Note
The panel lists house codes A - O. Ask your installer what house code your lights are set up
on. Your house code for lights is ___.

Unit Number

Refers to a specific light within a house code.
¾ How to set time for light control:
1. Open the cover of the panel.
2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-
ter access code using the numbered keys.
3. The panel voice prompts you to Please select from START MENU. Press the Add
button on the START MENU.
4. The panel voice prompts you to Select from MAIN MENU. Press the Light Con-
trol button on the MAIN MENU.
5. The panel voice responds with House Code is *, press again to change or press unit
number. This is the House Code that was set by your installer. Don't change it.
Press the Unit # button.
6. The panel responds with Unit #1 press again to change or select from control
menu. Keep pressing the Unit # button until the correct unit is selected.
7. Press the Time button on the control menu. The panel voice prompts you, On time
is **** to change press hours and minutes then press done.
8. Press the Hours and Minutes buttons to set the correct on time.
9. Press Done. Panel will announce, Off time is **** to change press hours and min-
utes then press done.
10. Press the Hours and Minutes buttons to set the correct off time.
11. Press Done. Panel will announce the unit number with the on and off times you just
programmed.
The following table is a list of options you can change.
Option #
01 - Panel Beeps
02 - Panel Voice
* See "Option 43 - Pager/Voice Event Notification Phone Number"

Programming Options

Add
On
On
Delete
Off
Off
Simon Security System