Paging - GE Security Pro 500 User Instructions

25
The time allowed to leave the premises after arming the system is the Exit Delay time.
Door
1
2
3
4
5
Feature
Quick Arm • Yes. Press the arming level desired.
• No. Enter arming level, then access code.
Quick Exit
• Yes. Press
utes.
• No. I need to disarm my system in order to exit the premises.
Exit Exten- • Yes. If I reenter the armed premises during the Exit Delay time, the Exit Extension
sion
will begin.
• No. If I reenter the armed premises during the Exit Delay time, it will continue to
count down and I must disarm the system.
Keyswitch • Yes. I can use a key to arm the system. The switch is located:
Arming
_____________________________________________________________
_____________________________________________________________
• No.
Auto STAY • Yes. If, after arming to Level 3—AWAY, I don't exit through a designated delay
Arming
door, the system will arm to Level 2—STAY.
• No. If, after arming to Level 3—AWAY, I don't exit through a designated delay
door, the system will continue to arm to Level 3—AWAY. And, if my system con-
tains motion detectors, movement may cause an alarm.

Paging

For what events will the central station or pagers be notified?
Is the Streamlining feature enabled?
• Yes. When the system pages me, the message will not include the central station account
number.
• No. All pages from my system will include the account number.
• According to my pager provider, the central station account number will appear as:
___________________________________________________________________
Door Location
My system features include:
D
and exit your armed premises through a delay door within 2 min-
Reporting Features
High Level Reports
Low Level Reports
Opening/Closing
Reports
Latchkey Reports
Entry Delay Exit Delay
Pagers
CS 1 CS 2
1 2
N/A N/A
Security Pro 500
3