Wheel/Tire; Steering Handle Top Bearing - Sym HD 125 Service Manual

2. MAINTENANCE INFORMATION

Wheel/Tire

Caution
Tire pressure check should be done as cold
engine.
Check if tire surface is ticked with nails, stones or
other materials.
Appointed tire pressure
Tire size
Load for
Tire
under 90 Kg
pressure as
cold engine
Full loaded
(Kg/cm²)
Check if front and rear tires' pressure is in normal.
Measure tire thread depth from tire central
surface.
Replace the tire if the depth is not come with
following specification:
Front tire: 1.5 mm
Rear tire: 2.0 mm

Steering Handle Top Bearing

Caution
Check all wires and cables if they are interfered
with the rotation of steering handle bar.
Lift the front wheel out of ground.
Turn handle from right to left alternative and check
if turning is smoothly.
If handle turning is uneven and bending, or the
handle can be operated in vertical direction, then
adjust the handle top bearing.
2-12
To this chapter contents
Front tire Rear tire
1.75 2.25
1.75 2.5
¿ i · l · ¥ - - « ü ¼ Ð
¡ © ¡ µ ¡ ª mark