Fuel Tank - Sym HD 125 Service Manual

4. FUEL SYSTEM

Fuel Tank

Fuel unit removal
Open the seat.
Remove the luggage box (6 bolts and 1 screw).
Remove rear carrier (4 bolts).)
Remove body cover.
Disconnect fuel unit connector.
Remove fuel unit (4 screws).
Caution
£ » Do not bend the float arm of fuel unit
£ » Do not fill out too much fuel to fuel tank.
uel unit inspection. (Refer to electrical equipment
F
chapter 17)
Fuel unit installation
Install the gauge in the reverse order of removal.
Caution
Do not forget to install the gasket of fuel unit or
damage it.
Fuel tank removal
Remove the Fuel cut valve assembly and Fuel
tube.
Remove fuel tank (4 screws).
Installation
Install the tank in the reverse order of removal.
4-10
To this chapter contents
Fuel unit connector
Fuel cut valve
Fuel tube
4 bolts