Light / Bulb - Sym HD 125 Service Manual

17. ELECTRICAL SYSTEM

Light / Bulb

Replacing bulb for headlight
Remove the front cover.
Disconnect the terminal coupler and the rubber
sleeve from the headlight.
Remove the bulb spring holder and the bulb.
Replace with new bulb if necessary.
Caution
Never touch the bulb with finger, which will
create a heat point.
Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order of
removal.
Upon completion of replacement, turn on the main
switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
17-12
To this chapter contents
Headlight
Headlight
Holder
Headlight adjustment screw
Position light
Position light
Bulb
Headlight Position light