Sym HD 125 Service Manual page 183

To this chapter contents
15. STEERING / FRONT WHEEL / FRONT CUSHION
Install the steering stem mounting nut and tighten
the nut by means of holding the top cone race
body.
Torque value: 1.0~2.0kgf-m
Steering lock nut
Install in reverse order of removal procedures.
Top cone-race
Shake steering handle up & down, left & right, and
front & rear to check if it is loosen, has too much
resistance and pulls to one side.
Check steering handle if it is being pulled too tight
by the brake cables.
15-10