Sequences; Creating Sequences - Pfaff 3119 Instruction Manual

11

Sequences

.06
In a maximum of 3 different sequences, up to 33 vario programs in each sequence can be
combined in any order and processed later. Before sequences can be generated, appropriate
vario programs (buttonhole or bartack programs) have to be created, see Chapter 11.05
Vario programs. The sequences are arranged with parameters "111", "112" and "113", which,
in the sequence mode, are directly allocated to the appropriate keys on the control panel,
see Chapter 7.05 Control panel. Within the sequence the functions "cutting" and "double se-
wing cycle" can be allotted to the buttonhole programs.
11

Creating sequences

.06.01
The following example describes how sequences are created.
●
Switch on the machine.
●
Select the input mode (LED in the key is on).
●
Select the function group "
●
Confi rm input with the "Enter" function by pressing the right
●
Call up parameter "
●
Confi rm input with the "Enter" function by pressing the right
S EQ 1
1
●
Select the desired vario program, e.g. bartack program "T
minus key.
No
1 0 0
100" with the corresponding plus/minus key.
No
1 1 1
111" with the corresponding plus/minus key.
T 3 E X I T
plus key.
plus key.
3" with the corresponding plus/
Input
65