Malfunctions; Error Messages - Pfaff 3119 Instruction Manual

Adjustment
13

Malfunctions

.49
13

Error messages

.49.01
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
138
1: System fault in the control unit
2: Defect on sewing motor
30: Time out + motor defect
20: Time out + motor defect
10: Speed + motor defect
0B: StopX + motor defect
0A: Reset stitch counter + motor defect
9: Write parameter + motor defect
5: Position tdc shortest path + motor defect
3: Position tdc backwards + motor defect
2: Position tdc forwards + motor defect
3: Knife control (e.g. mechanically locked)
4: Cutter control
5: Lift control of work clamp
6: Time control when working through the sewing program
7: Ramp end of stepping motor
7-1: Ramp end of stepping motor
7-1: Delay X not finished
7-2: Delay Y not finished
7-3: Delay X and Y not finished
7-4: Ramp X not finished
7-5: Ramp Y not finished
8: Stitch length too large
9: Sewing pattern outside area
10: Error when moving the machine into basic position (home)
10-1: Outputs not finished
10-2: Raise work clamp
10-3: Start sewing position not reached
10-6: Foot pedal operated
10-7: X-centre not reached
10-8: still at X-centre
10-9: Y-centre not reached
10-10: still at Y-centre
10-11: time control home test
10-12: Absolute position –0.3 not reached home test
10-13: Absolute position +0.6 not reached home test
10-14: Move to tdc take-up lever
11: Stepping frequency of the stepping motor is too high
12: Error in sewing program