Creating / Modifying Vario Programs In The Bartack Mode - Pfaff 3119 Instruction Manual

Input
11

Creating / modifying vario programs in the bartack mode

.05.03
A variable program is written with the parameters of the function group "300".
The variable program can be adapted to individual requirements by altering individual para-
meters.
As illustrated below, vario programs consist of 2 sections
●
●
In addition to the purely geometrical data, a vario program is also defi ned with further para-
meters:
●
●
58
1st seam (forwards seam)
2nd seam (reverse seam)
Bartack model 35, see Chapter
Secondary thread tension 1st and 2nd seam
Width 1. seam
Width 2. seam
11.05.04 Buttonhole and bartack models
Parameter
301
302
303
304
305
306
307
308
309
310
311
Description
Program number
Bartack length [mm]
Bartack model
no function
(bartack model 35)
Width of 1st seam [mm]
Stitch length 1st seam [mm]
Secondary thread tension
1st seam
no function
(bartack model 35)
Width 2nd seam [mm]
Stitch length 2nd seam [mm]
Secondary thread tension
2nd seam