Entering Data - Garmin eMap Owner's Manual

Naming a waypoint, entering a street address or
placing any sort of data that has not been pre-defined
requires the use of both the ROCKER keypad and the
ENTER key.
To enter a name or number in a data field:
1. Once you have accessed a page with programmable
data fields (i.e. 'Mark Waypoint', 'Find Address') you
can use the ROCKER keypad to move the cursor
(Highlight) to fields on the page. Use the Up/Down
bars to move up or down and the Left/Right bars to
move sideways.
2. Pressing the ENTER key with the field highlighted
begins the process for entering data in the form of
alphanumeric characters.
3. Use the ROCKER keypad Up/Down bars to cycle
through numbers 0 to 9, plus, minus symbols, blank
space, and the alphabet. Pressing and releasing the
keypad moves you character by character through
the list. Pressing and holding the keypad moves you
rapidly through the list.
4. Use the ROCKER keypad Left/Right bars to move
to the next character on the line or backwards to
edit characters.
5. When data entry is completed press ENTER to
accept data, then move to the next programmable
field. Not all data fields are programmable, like the
date and time. When moving about a page with
these type fields, the cursor will skip over them.
A waypoint symbol can be
selected from a list of symbols.
The waypoint can be renamed.
The coordinates can be
changed.
The elevation can be changed.
The buttons can be activated
Reference

Entering Data

You can enter both names
and numbers using the
ROCKER keypad and
ENTER key in
programmable fields.
Data Entry Field
Non-Programmable Data
Fields
5