Marking A Waypoint - Garmin eMap Owner's Manual

Marking a Waypoint

A waypoint is any identified point on the map that
has been named and recorded. The eMap can store 500
waypoints in memory. Waypoints are used to build routes
and as destinations to Goto.
To create a personal waypoint:
1. Press and hold the ENTER key for more than 1
second to create a new waypoint for your current
location. It will automatically be assigned a 3-digit
number or you can name it as a personal waypoint.
2. To save the waypoint and store it on the Waypoints
List, press the 'OK' button to save the waypoint.
3. To name the waypoint, use the ROCKER keypad to
highlight the waypoint name field. Press the ENTER
key to isolate the first character of the name and
then use the ROCKER keypad Up/Down bars to
enter the first character of the name. Use the Right
bar to move to the next character and repeat the
process until you have entered the name. Then press
ENTER to confirm the name. You can enter a total
of 10 characters in the field. This waypoint name
will appear on the Map Page.
4. To assign an identifying map symbol to a waypoint,
use the ROCKER keypad to highlight the field at
the left of the name field. Then press ENTER to
display the Waypoint Symbol List. Use the ROCKER
keypad to scroll through the list of symbols and
select one that best describes the marked
waypoint. Then press ENTER to assign the symbol
and return to the waypoint page. The symbol will
now appear along with the name on the Map Page
when you select the 'Map' button and press the
ENTER key.
Reference
Marking a
Waypoint
The 'Mark Waypoint' Page
with automatically assigned
waypoint number.
To personalize a waypoint by
assigning a name, use the
ROCKER keypad
and ENTER key.
The Waypoint Symbol List
allows you to mark a
waypoint on the map using
an indentifying map symbol.
13