Garmin eMap Owner's Manual page 35

'Time' Settings Page
The 'Time' Settings Page allows you to choose from a
12 hour or 24 hour time format, enter the proper time
zone, enter the proper UTC Time Offset and choose to
activate or deactivate Daylight Savings Time.
When you select 12 hour time formatting, the clock
will read like a standard clock with 12 hour AM and 12
hour PM cycles. The 24 hour option sets the eMap to
display a 24 hour cycle (Military Time).
The time zone can be set to any one of nine pre-
programmed zones or by entering the UTC Time Offset
value in the field to the right of the time zone field. You
can find time offset values for your longitude by
following instructions and the Time Offset Chart on page
34.
Daylight savings time can be set to Automatic (using
the built-in almanac to automatically change the clock
settings when daylight savings goes into or out of effect).
You can choose 'Yes' to manually add daylight savings or
'No' to remain on standard time.
'Current Date' and 'Current Time' fields are not
programmable.
To program the 'Time' Settings Page:
1. Highlight the field you want to program using the
ROCKER keypad and press the ENTER key to pop-
up the options window.
2. Highlight the desired option using the ROCKER
keypad and then press the ENTER key to confirm.
3. To exit the Setup program, press the ESCAPE key.
4. To enter a special UTC time offset value, you must
first highlight the UTC Offset field. Press ENTER to
highlight the first digit then use the ROCKER
keypad Up/Down arrows to enter the first digit from
the UTC Time Offset Chart (page 34). Use the Right
arrow to move to the next digit and repeat the
process until the value has been entered then press
ENTER to confirm your entry. The 'Time Zone' entry
will automatically change to match the UTC offset.
Reference
eMap Setup
'Time' Settings File
Time Format Options
Time Zone Options
Daylight Savings Time
Options
UTC Time Offset Entry
(See Appendix E)
Date and Time are fixed fields,
but change with 'Offset' settings.
27