The Gps Info Page - Garmin eMap Owner's Manual

Reference
GPS Info Page
Current location coordinates.
15
04 06 07 10 13 15 17 18 24 30
Status Bars Sky View
The GPS Information Page
acquiring satellites. Hollow bars
indicate acquiring satellites.
Solid bars indicate acquired
satellites and are identified by
the highlighted numbers in the
sky view.
GPS Status Page Options
Elevation Entry Field
24
The GPS Information Page provides a visual reference
of various receiver functions, including current satellite
coverage, receiver operating mode, estimated accuracy,
elevation, speed, and current location. As the receiver
locks onto satellites, a signal strength bar will appear for
each satellite in view, with the appropriate satellite
number (01-32) underneath.
Each satellite has a 30-second data transmission that
must be collected before that satellite can be used for
navigation. Once a fix has been calculated, the eMap will
update your position, track and speed, by using the best
satellite signals.
You can use the GPS Information Page to set the Sky
View orientation either 'North Up' or 'Track Up'. You can
set your location, set your elevation from the pop-up
options list.
When you first turn the unit on the page header will
read 'Acquiring Satellites'. When it locks onto enough
satellites to navigate it will read '2D GPS Location' or '3D
GPS Location'.
When the 'Use Indoors' option is chosen from the
Map Page Options Menu, the GPS Information Page will
not be accessible.
Receiver Status
Location Coordinates
Elevation
Accuracy
Sky View
Signal Strength Bars
Speed
03
09
07
02
05
01
06
04
08