Blower Assembly Leds; Blower Assembly Led Descriptions - IBM SAN384B Installation, Service And User Manual

Figure 29. Blower assembly LEDs
58
SAN384B Installation, Service, and User Guide
1 Power LED
2 Fault LED
Table 13. Blower assembly LED descriptions
LED purpose Color
Power No Light (LED is off) Blower assembly
Steady green
Fault No Light (LED is off) Blower assembly is
Steady amber
Slow-flashing amber
(on 2 sec, then off 2
sec)
Flashing amber (on
1/2 sec, then off 3.5
sec)
Fast-flashing amber
(on 1/2 sec, then off
1/2 sec)
2
1
Recommended
Status action
Ensure that the
does not have power. blower assembly is
firmly seated and has
power.
Blower assembly has No action required.
power.
Ensure that the
either healthy or blower assembly has
does not have power. power.
Blower assembly has Replace the blower
a failure (full or assembly.
partial).
Blower assembly is Pull the unit out and
not seated correctly reseat it. If the LED
or is faulty. continues to flash,
replace the unit.
Fan is disabled. Run fanEnable to
enable the fan.
Environmental range Check for
exceeded. out-of-bounds
environmental
condition, resolve
any problems, and
reseat the unit. If the
LED continues to
flash, replace the
unit.