Stanford Research Systems SR530 Manual page 8

Acquisition Time
Slew Rate
Phase Control
Phase Noise
Phase Drift
Phase Error
Orthogonality
Demodulator
Stability
Time Constants
Offset
Harmonic Rej
Outputs & Interfaces
Channel 1 Outputs
Channel 2 Outputs
Output Meters
Output LCD's
Output BNC's
X Output
Y Output
Reference LCD
RS232
GPIB
A/D
D/A
Ratio
Internal Oscillator
25 Sec at 1 Hz
6 Sec at 10 Hz
2 Sec at 10 kHz
1 decade per 10 S at 1 kHz
90° shifts
Fine shifts in 0.025° steps
0.01° rms at 1 kHz, 100 msec, 12 dB TC
0.1°/°C
Less than 1° above 10Hz
90° ± 1°
5 ppm/°C on LOW dynamic reserve
50 ppm/°C on NORM dynamic reserve
500 ppm/°C on HIGH dynamic reserve
Pre: 1msec to 100 sec (6 dB/Octave)
Post: 1sec, 0.1 sec, none (6 dB/Octave) or none
Up to 1X full scale (10X on expand)
Both channels may be offset
-55 dB (bandpass filter in)
X (RcosØ), X Offset, R (magnitude), R Offset, X Noise, X5 (external D/A)
Y (RsinØ), Y Offset, Ø (phase shift of signal), Y Noise, X6 (external D/A)
2% Precision mirrored analog meter
Four digit auto-ranging LCD display shows same values as the analog meters
±10 V output corresponds to full scale input, <1Ω output impedance
X (RcosØ), ±10 V full scale, < 1Ω output impedance
Y (RsinØ), ±10 V full scale, < 1Ω output impedance
Four digit LCD display for reference phase shift or frequency
Interface controls all functions. Baud rates from 300 to 19.2 K
Interface controls all functions. ( IEEE-488 Std )
4 BNC inputs with 13 bit resolution (±10.24 V)
2 BNC outputs with 13 bit resolution (±10.24 V)
Ratio output equals 10X Channel 1 output divided by the Denominator input.
Range: 1 Hz to 100 kHz, 1% accuracy
Stability: 150 ppm/°C
Distortion: 2% THD
Amplitude: 1% accuracy, 500 ppm/°C stability
4