Cleaning The Model 2120; Cleaning The Blood Pressure Arm Cuff; Storage - Nonin 2120 Operator's Manual

C a r e a n d M a i n t e n a n c e
9.1

Cleaning the Model 2120

Use the following information to clean the Model 2120 Pulse Oximeter
and NIBP Monitor.
IMPORTANT! Do not immerse the Model 2120 in liquid, and do
Clean the Model 2120 separately from its associated sensors. For
instructions regarding cleaning pulse oximeter sensors, refer to the
appropriate pulse oximeter sensor package inserts.
Clean the Model 2120 with a soft cloth dampened with isopropyl alcohol.
Do not pour or spray any liquids onto the Model 2120, and do not allow
any liquid to enter any openings in the device. Allow the Model 2120 to
dry thoroughly before reusing it.
IMPORTANT! If the Model 2120 accidentally becomes wet,
9.2

Cleaning the Blood Pressure Arm Cuff

To clean the blood pressure arm cuff, simply wipe the cuff with a soft
cloth dampened with isopropyl alcohol. Do not pour or spray any liquids
onto the arm cuff, and allow the cuff to dry thoroughly before reusing it.
9.3

Storage

Store the Model 2120 within the stated environmental specifications. See
Specifications on page 11-1 for additional information.
9-2
not use caustic or abrasive cleaning agents on the
Model 2120.
ensure that the unit is unplugged, and allow it to
air dry for one hour. A soft cloth may be used to
dry the front panel or body of the Model 2120.