Top Vent or Rear Vent Configuration
This appliance is shipped in the rear vent configuration. To change to the top vent configuration, follow
the directions below.
NOTE: the vent configuration affects several aspects of installation (framing, maximum vent rise,
maximum vent run). Make sure the vent configuration is correct prior to installation. You may wish to
configure the diffuser when changing the vent configuration.
Converting the
Fireplace to Top
Vent
Configuration
© Travis Industries
Installation
(for qualified installers only)
Remove the 4 screws
securing the cover plate.
Remove it and place it
aside.
Remove the 4 screws
securing the intake cover
plate. Remove it and place it
aside.
Remove and discard all of
the insulation found near
the flue assembly (make
sure to remove every
piece).
4090227
Remove the 4 screws
securing the cover plate (with
hole).
This part may be discarded.
100-01220_000
9