Travis Industries 864 TRV GreenSmart Installation Manual page 63

Optional Equipment
4 Disconnect the molex connector leading to the gas control valve (see Figure 5).
WARNING: The tabs on the gas control valve are fragile. Take care when removing the molex
connector to not pull or damage the wires or tabs.
5 Disconnect the two leads on the back of the control panel for the IPI / CPI switch (continuous pilot
/ greensmart pilot – see Figure 6).
6 Disconnect the comfort control valve connection (see Figure 7). Disconnect the burner control
connector from the fireplace burner control (see Figure 8).
© Travis Industries
(for qualified installers only)
Figure 7
4090227
63
Figure 5
Figure 6
Figure 8
100-01220_000