Table of Contents
Advertisement
Heat pump split single service 3 phase
3 4
Parametering the setting
3 4 1 General
Only the parameters accessible to levels :
U - End user.
I - Commissioning level.
S - Engineer level.
Are described in this document.
The access levels are specified in the second column of
the table by means of the letters U, I and S.
The OEM parameters are not described and require a
manufacturer's access code.
OK
Basic
Brief press
display
Press for
3 seconds
3 4 3 List of function lines (settings, diagnosis, status)
Line
Function
Date and time
1
U
Hours / Minutes
2
U
Day / Month
3
U
Year
5
S
Start of summer time (Day / Month)
6
S
End of summer time (Day / Month)
The change of hour will appear at 3:00 am first Sunday after the regulated date.
User interface
20
U
Language
22
S
Info
26
S
Operation locking
27
S
Programming locking
28
I
Direct adjustment
- 32 -
End user
Time of day and date
Operator section
Time prog heating circuit 1
End user
Commissioning
Time of day and date
Operator section
Time prog heating circuit 1
3 4 2 Setting parameters
- Choose the desired level.
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter.
- Check the setting by pressing OK.
- To return the menu, press ESC.
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
OK
Hours / minutes
1
Day / month
2
Year
3
Engineer
OEM
Hours / minutes
1
Day / Month
2
Year
3
Start of summer time
4
End of summer time
5
Setting range
or display
00:00... 23:59
01.01... 31.12
1900... 2099
01.01... 31.12
01.01... 31.12
English, Français, Italiano,
Nederlands
Temporary | Permanent
On | Off
Off | On
Automatic storage...
Storage with confirmation
Installation and operating manual "1364 - EN"
OK
Hours
1...24 h
Minutes
0...60 min
01.01...31.12
Setting
Base
increment
setting
1
1
1
1
25 03
1
25 10
English
Temporary
Off
Off
Storage with
confirmation
OK
Hide quick links:
Advertisement
Table of Contents
