Contacts:
Contacts are available on your IP Phone and can be created via the web GUI.
Follow instructions below to program your contacts. To view them on your IP
phone; press the Directories Button, then Personal Directory. When prompted to
login; use the same username and PIN that you used to login to the CCM User Page
(for example; JDoe and 123321).
Contacts:
Personal Directory is your own directory where you can store numbers via the User
Options page. This is a secure directory which is only accessible by your phone and
is not shared with rest of the organization.
Page
11
Presented by
Log in to the directory using your user ID and PIN.
Search for your personal entries.
Press Dial soft key to dial the selected number
Note: Personal Directories are setup in the UCM User Options Menu.
Instructions are later in the presentation.
Company Directory:
Press the Directories button
Use the navigation button to select the Company Directory
Use the navigation button to enter the Last, First or Number fields search
option, and press the Search soft key to find your selection
Use the navigation button to find your listing
Press Dial soft key to dial the selected number
BASIC CALL FEATURES
Place a call:
Lift the handset and dial the number.
Press a line button and dial the number.
Press the Speaker button and dial the number.
Press the NewCall soft key and dial the number.
Answer a call:
Lift the handset.
Press the line button associated with the call.
Press the Answer soft key.
End a call:
Hang up the handset.
Press the Speakerphone
Press the EndCall soft key.
Redial the most recently dialed number:
Lift the handset and press the Redial
Redial soft key button to activate the speakerphone.
Place a call on hold:
Page
4
button.
button or simply press the
Presented by