Basic Features; Placing A Call - Cisco M5 Basic User's Manual

2. Basic Features

External call > Dial 0
When making an external call, dial 0 first. Then dial the phone number
including the area code e.g. 0+02+90346500
Internal call > 4 digit extension
When making an internal call, you can just dial the last 4 digits of your team
member's phone number. This is referred to as your extension.
NOTE: The following is a good guide on how to dial: Use '0' for an Outside Line.

Placing a Call

A new call may be placed by one of two methods: dialing on hook or dialing off
hook.
To Dial Off hook:

Lift the handset and dial the number;
or

Press the SPEAKER button and dial a number;

Press the LINE button and dial a number;

Press the HEADSET button and dial a number (if headset attached).
To Dial Unhook:

Dial the number and lift the handset;
or

Dial the number and press the

Dial the number and press the SPEAKER button;

Dial the number and press the LINE button;

Dial the number and press the HEADSET button (if headset attached).
M5 Support 1300 302 383 | support@m5networks.com.au
or
or
DIAL soft key; or
or
or
Page 5