Acknowledging The Buswide Alarm Flag - Honeywell XI581AH User Manual

EVERYDAY OPERATIONS
Alarm Standby Flag Example
Disable Buswide Alarm Notification
EN2B-0126 (74-3554-8)
2. Use the arrow keys to move to and highlight Buswide Access. Then press
Enter (↵) to complete the selection.
RESULT: The display window lists the buswide access options you can choose.
Buswide Access
CONTROLLER_03
Remote Login
Show All DevicesAlarm Standby Off
3. Use the arrow keys to move to and highlight Alarm Standby On. Then press
Enter (↵) to complete the selection.
RESULT: Software enables buswide alarm mode to enable receiving of
4. Use the arrow keys to move to and highlight Alarm Standby Flag. Then press
Enter (↵) to complete the selection.
RESULT: The system is set to place the buswide alarm flag, !, in the top right-
5. Press Cancel (C) to exit this screen and return to the Main Menu.
The following level-3 menu shows the exclamation mark, !, in the upper right-hand
corner of the screen.
Time Programmes
Data Points
Totalizers
Parameters
When an alarm occurs, the flag starts blinking.
To disable alarm reporting, follow Steps 1 and 2 in the previous procedure. In Step
3, highlight Alarm Standby Off and press Enter (↵) to complete the selection. The
system removes the flag from all display windows.
Purpose To notify the system that you saw the notification of a new buswide alarm (blinking
exclamation mark, !, in the top right-hand corner of any display window).
Procedure Use the arrow keys to move to and highlight the alarm flag. Then press Enter (↵) to
complete the selection.
RESULT: The flag stops blinking but remains on display.
XI581/2 BUSWIDE OPERATOR INTERFACE
Alarm Standby On
Alarm Standby Flag
buswide alarms into the buffer (the "Viewing Buswide Alarms" section
describes the procedure).
The 'Buswide Access' screen remains on display.
hand corner of most other windows.
The 'Buswide Access' screen remains on display.
CONTROLLER_01
Running 15.12.1994
Alarms
Trend Buffer
System Clock
System Data

Acknowledging the Buswide Alarm Flag

The flag remains as long as buswide alarm notification is enabled.
See section "Enabling/Disabling Buswide Alarm Mode and Alarm
Flag" (page 23) for details.
24
18:16!