Day Of The Week; Creating A Simple Schedule (By Example) - Honeywell FUSION III DVR User Manual

Setup Options

Day of the Week

Creating a Simple Schedule (By Example)

________________________________________________________________________________________________________
46
The Day of Week is the day of the week for which the schedule is being edited. If WED
is checked, Wednesday's schedule is being edited.
The Single Day Selection button allows selection of multiple days at once.
By selecting the Single Day Selection button placing multiple checks in the boxes is
allowed, thereby selecting multiple days simultaneously.
Clicking on Single Day Selection will change the button to Multi-Day Selection. This
enables the user to select multiple days to configure at once.
Creating schedules is easy with a little experience. In the following example, the steps
for creating a simple schedule for cameras 1 to 4 are detailed.
The schedule will be as follows:
1. MON-FRI (9AM-5:59PM) all 4 cameras will record using MOTION recording.
2. MON-FRI (6PM-8:95AM) all 4 cameras will record using CONTINUOUS recording.
SAT-SUN (12AM-11:59PM) all 4 cameras will record using MOTION recording.
3.
Using these examples, a total of 3 schedules will be created.
Document 900.0803 Rev 7
02/29