Assigning Distributed I/O Modules - Honeywell XI581AH User Manual

Buswide operator interface
Table of Contents

Advertisement

XI581/2 BUSWIDE OPERATOR INTERFACE
DIO Module Assignment
Use Existent Assignment
16:35:31
AI0101
Alarm
Press Cancel (C) to return to the previous screen (list of user addresses).
IMPORTANT
After using test options, reset the controller to clear the alarm buffer.
Purpose
To assign Distributed I/O modules where there are more than one Excel 500
controller on the L
NOTE: If there is only one Excel 500 controller on the L
Distributed I/O modules are assigned automatically.
IMPORTANT
To perform the module assignment in this section, Distributed I/O modules
must be XFL5xxB 2.xx firmware or later.
4. From the 'Data Point Wiring Check' screen shown above (Step 3), use the arrow
keys to move to and highlight DIO Module Assignment and press Enter (↵) to
complete the selection.
NOTE:
RESULT:
DIO Module Assignment
Use existent Assignment
Create new Assignment
Both options will lead to the mask shown below, but with different actions behind
them:
Use existent
Assignment
Create new
Assignment
5. Use the arrow keys to move to and highlight Use existent Assignment and
press Enter (↵) to complete the selection.
RESULT:
!!! ALARM !!!
17.09.98
0.0
BACK
WITH
C-BUTTON
W
network.
ON
ORKS
The DIO Module Assignment option appears only if there is a
LonMark™ interface available.
The following screen appears with additional options.
Displays current Distributed I/O module assignments. This
option is displayed only if at least one Distributed I/O module
is already assigned. This option is also used to reactivate /
deactivated assignments.
Displays empty listbox with no Distributed I/O modules
assigned. Any existing Distributed I/O assignments will be
cleared.
The display window lists the Distributed I/O modules on the L
network (up to 16, according to the addresses selected on the
modules' hex address switches). This screen will be displayed also
when 'Create new Assignment' is selected, but with all addresses
unassigned.
43
EVERYDAY OPERATIONS

Assigning Distributed I/O Modules

W
network,
ON
ORKS
EN2B-0126 (74-3554-8)
W
ON
ORKS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xi582ah

Table of Contents