Honeywell XI581AH User Manual page 36

EVERYDAY OPERATIONS
EN2B-0126 (74-3554-8)
RESULT: The 'System Data' screen displays four possible options (depending
on access level).
System Data
System Info
HW-Interface Config.
Flash EPROM
Buswide Access
System Info Displays names of project, application, controller and system
version number.
HW-Interface
Config. Provides access to the hardware interface configuration
settings such as baud rates.
Flash EPROM Access to Flash EPROM functions. These functions include
erasing Flash EPROM and saving application data from RAM
to Flash EPROM. See section "Flash EPROM and RAM
Management" (page 63) for details.
Buswide Access Access to buswide access mode functions. These functions
include:
• Display a list of all currently active bus devices (see section
"Viewing Bus Devices", page 96).
• Initiate remote log-in to remote controllers (see section
"Logging into a Remote Controller", page 18).
• Display buswide alarms (see section "Viewing Buswide
Alarms", page 22).
• Enable/disable buswide alarm notification (see section
"Enabling/Disabling Buswide Alarm Mode and Alarm Flag",
page 23)
2. To display more information for a controller, highlight Next and then press Enter
(↵) to complete the selection. The following screen displays.
System Info
Project Name : APPL_4
Applic. Name : CONTROLLER_03
Controller Name: CONTROLLER_03
Burn Date : 01.01.2000 14:30
System Version : V 2.04.01
Project Name Project name given from CARE.
Applic. Name The name of the currently selected application in the
controller.
Controller Name Controller's system name.
Burn Date Burn date of the application after it is saved in Flash (prior to
that, '00.00.0000 00:00' is displayed; older applications display
blanks).
System Version Versions of the operating system.
3. To display more information for a controller, highlight Next and press Enter (↵).
The following screen displays the tool identification information.
32
XI581/2 BUSWIDE OPERATOR INTERFACE
Next