Carrier VECTOR 6500 Operation & Service Manual page 234

Alarm
Steps
NO.
229 SERVICE SOON-PM #4 DUE
•
TRIGGER–ON: The Maintenance Hour Meter #4 time has expired.
•
UNIT CONTROL: Alarm Only. Alarm Light will NOT be turned on.
•
RESET CONDITION: Alarm may be manually reset via keypad.
1 Check Unit Maintenance Records
Schedule unit into service facility for
maintenance
2 Perform Maintenance
Perform appropriate engine & unit
maintenance.
3 Reset Maintenance Hour Meter #4
a. Check that Maintenance Hour
Meter #4 interval is set for your
requirements.
b. Reset Maintenance Hour Meter #4
for the next service interval.
230 SERVICE SOON-PM #5 DUE
•
TRIGGER–ON: The Maintenance Hour Meter #5 time has expired.
•
UNIT CONTROL: Alarm Only. Alarm Light will NOT be turned on.
•
RESET CONDITION: Alarm may be manually reset via keypad.
1 Check Unit Maintenance Records
Schedule unit into service facility for
maintenance.
2 Perform Maintenance
Perform appropriate engine & unit
maintenance.
3 Reset Maintenance Hour Meter #5
a. Check that Maintenance Hour
Meter #5 interval is set for your
requirements.
b. Reset Maintenance Hour Meter #5
for the next service interval.
Alarm/Cause
7−101
Corrective Action
Must be done soon!
Follow instructions on proper maintenance form.
Reset configured Interval if required.
Hour Meter reset is a Functional Parameter.
Follow maintenance interval recommendations in
Section 8.2.
Must be done soon!
Follow instructions on proper maintenance form.
Reset configured Interval if required.
Hour Meter reset is a Functional Parameter.
Follow maintenance interval recommendations in
Section 8.2.
62-11389