Menu Controls; Adjustments; Advanced Setting Menus - Red Epic Epic-M Operation Manual

MENU CONTROLS

Displayed in the Upper Display Group of the VIEWFINDER output(s), are FRAMERATE (FPS),
EXPOSURE (ISO), _._ (F/Stop), WHITE BALANCE, RESOLUTION, and QUALITY (REDcode). These
parameters are adjustable directly through this screen. When using the touchscreen, directly to the right
of these parameters is the MENU icon
set up menus.

ADJUSTMENTS

BASIC SETTING ADJUSTMENTS
SIDE HANDLE / REDMOTE
•
Navigate to the desired setting using the NAVIGATION GROUP direction keys and press ENTER.
•
Use the Scroll Wheel or Adjustment Ring to increase or decrease the parameter value.
• When the desired value has been selected, press ENTER to set.
BASIC ADJUSTMENTS USING SIDE HANDLE ONLY
Although not recommended, the Side Handle can be used stand alone to make basic adjustments to
FPS, ISO, Shutter Speed, Resolution and REDcode located on the Main Menu screen. Use the
Navigation Group to make these adjustments while watching the cursor placement under the desired
setting on the side handle LCD. When desired setting is selected, press the Enter button to access, then
use the Scroll Wheel, Directional Pad or Adjustment Ring to make changes. When done, press the Enter
button again to set the changed parameter.
TOUCHSCREEN
•
Touch the desired parameter for adjustment.
•
Slide your finger across the screen to scroll through the available parameter values.
•
When desired the parameter value has been selected, touch anywhere in the screen area to set.
•
To close an alpha numeric keypad when entering information directly, tap anywhere on the screen
outside the keypad.

ADVANCED SETTING MENUS

At this time, only FRAMERATE, SHUTTER SPEED and WHITE BALANCE on the MAIN MENU have
advanced settings.
50 50
which when pressed will take you to the secondary camera
©2011 RED.COM INC.
Version 1.6.46
NOVEMBER 17, 2011