Maintenance; Upgrading Redmote Firmware - Red Epic Epic-M Operation Manual
Digital camera professional
Hide thumbs
Also See for Epic-M:
- Operation manual (256 pages) ,
- Operation manual (253 pages) ,
- Operation manual (216 pages)
Table of Contents
Advertisement
MAINTENANCE
UPGRADING REDMOTE FIRMWARE
The REDmote Update program allows you to upgrade the firmware on your REDmote.
NOTE: Once firmware is upgraded (on REDmote or camera) the REDmote must be paired to the
camera again.
SETUP
MAC – CONFIGURING REDMOTE CONNECTION WITH COMPUTER
The first step in upgrading REDmote firmware is to establish communication between the MAC and the
REDmote.
1. Connect a USB to mini-USB cable between the computer and the USB connector on the REDmote.
2. Go to System Preferences and choose Network. This may open automatically when the REDmote is
connected.
3. Look for a device called RNDIS/ ...Gadget.
4. Change Configure IPv4 setting to "Manually" (as shown).
5. In the IP Address field, enter 192.168.0.1 (as shown).
Version 1.6.46
163
NOVEMBER 17, 2011
©2011 RED.COM INC.
Advertisement
Table of Contents
