Setup - Red Epic Epic-M Operation Manual

SETUP

This menu permits a variety of system setup tasks to be accomplished. Options available are KEYS /
SHORTCUTS, DATE / TIME, NETWORK, SERIAL, REMOTE, GPIO, and SYSTEM.
KEYS / SHORTCUTS
Keys / Shortcuts display the USER KEY and KEY ACTION sub-menus. These options allow selected
menus or functions to be mapped to specific User Keys on the camera body and accessories. User keys
are also referred at as Soft Keys / Buttons.
USER KEY
Use this menu to select and program the camera user keys (buttons).
NOTE: To reset keys to default settings, go to RESTORE. A reboot of the camera is necessary to
restore defaults.
NOTE: Multiple keys can be programmed to the same action.
Default settings by device are listed below.
"Down" indicates pressing of the key.
-
"Side CF" refers to the Side SSD Module.
-
"Brain LCD" refers to the EVF/LCD being
-
plugged into the brain EVF/LCD connector.
"Tele Level" refers to the +/- rocker switch.
-
WARNING: IT IS NOT ADVISABLE TO REMAP THE NAVIGATION KEYS (UP, DOWN, LEFT, RIGHT,
SELECT (ENTER), OR MENU) ON THE SIDE HANDLE AS IT IS THEORETICALLY POSSIBLE TO
Version 1.6.46
NOVEMBER 17, 2011
"North, South, East, West" refers to the
-
Direction keys (Up, Down, Left, Right) on the
Navigation Group.
"Rotary Jog" refers to Scroll Wheel on the
-
Navigation Group.
"Rotary Front" refers to Adjustment Ring on
-
Side Handle near LCD.
©2011 RED.COM INC.
103