Spa Fill Up Procedure - Sundance Spas Hawthorne Owenrs Manual

7.0 Spa Fill Up Procedure

FOR BEST RESULTS, READ EACH STEP IN ITS ENTIRETY BE-
FORE PROCEEDING WITH THAT STEP.
1. Prepare The Spa For Filling
• Clear all debris from the spa. (Although the spa shell has been
polished at the factory, you may want to treat it with a specially
formulated spa cleaner. Consult your authorized Sundance
dealer for additional information prior to filling spa.
• Remove filter/skimmer lid, then remove filter cartridge as outlined
in section 11.1 (page 25).
2. Fill Spa
• Place the end of your garden hose into the empty filter bucket.
CAUTION: Never fill with water from a water softener. If
your water is extremely "hard", it is preferable to fill half-way
with hard water and the rest of the way with softened water.
Or, you may fill entirely with hard water if you use a special
water additive available from your authorized Sundance
dealer.
• Fill spa with clean tap water from garden hose until water covers
all jets. DO NOT OVERFILL!
Page 12
Figure-C
Main TB1 And TB3 Terminal Block Connections
RED
1
BLK
2
Green
All North American Models:
240 VAC, 3-Wire Connection (60Hz)
RED
TB1
RED
BLK
BLK
to Circuit
Board
TB3